BN-EP Recycled Carbon Fiber Chopped Particles

BN-EP Recycled Carbon Fiber Chopped Particles

With 

Characteristics

BN-EP Recycled chopped carbon fiber,in the state of clustered particles,is extracted from the edge material recovery in the production process of carbon cloth required for the preparation o the pre-impregnated material,and are produced by cutting, The product features that: sizing and so on.   （Recycled Carbon Fiber Chopped Particles）

BN-EP reinforced EP,PF composites can have the following characteristics:Significantly improve the strength and elastic modulus of products;Excellent wear resistance,fatigue resistance and dimensional stability;Light weight, good electrical conductivity and thermal conductivity.

The sizing agent used in BN-EPproducts has good EPresin compatibility to promote the excellent interface property.  （ Recycled Carbon Fiber Sizing-free）

• High interfacial bonding strength with EP,PF resins;
• Excellent dispersivity in EP,PF resins.

Performance parameters

Storage

• Please store the product in a dry environment,with temperature and humidity recommended to be controlled between 0- 30℃and below 50%.
• This product should always be plaed under sealed packaging before use.

Note:

Factors such as humidity and temperature during use and transportation can affiect product performance.

*Standard package 20kg.Dimensions:510mm*320mm*365mm;Bag size:1000mm*600mm;Pallet sizes:1100mm*1100mm.

The product data and parameters quoted in this data sheet were obtained from this material under strict control in Saxobrantech Laboratory.

Therefore these data and parameters can reflect the representative attributes of the product. Saxobrantech does not assume any responsibility if the user improperly uses these products.

The numerical value obtained by applying this material comes from the processing details.Users are advised to develop their own application technology and obtain data consistent with their specific applications and processes.

Cautions for Saxobrantech product use

Due to the conductivity of carbon fiber,various electronic and electrical equipment on site need to be protected against dust in order to prevent power accidents.

Carbon fiber or its products on the skin may cause itching,pain,inflammation and other symptoms.In order to protect respiratory organs,eyes and skin,please use corresponding labor protection articles.

Please ask Saxobrantech business department for them.

Notes

For other instructions,the material safety data sheets(MSDS)are available.

The product applications listed here are only the application examples. Saxobrantech does not guarantee its applicability and safety.When using the product, please confirm its safety and relevant restrictions according to its purpose.

Customers are advised to investigate the end use of their products in advance to ensure the correct use of Saxobrantech products.

In order to ensure that the Saxobrantech products are not misused, it is recommended to contact the business representative of Saxobrantech business representative.